|
Scale Available:
This Kit Includes:
What to Expect:
It is 3D printed and comes unpainted and unassembled. Some surface preparation may be needed. The item has been cleaned up from the printing process (removed support structures and excess material trimmed.) Below are some photos showing the items in their natural, non-post-worked state. Please see our notes on 3D printing to help further understand what you'll be receiving. |
Other props that might be useful:
Barrel (version 2)
$6.00
This 3D printed barrel is designed differently from our other barrels. The walls are thinner than normal, and made from PLA which has a low melting point. The barrel can be warped with a bit of heat from a hair dryer to achieve a "dented" look.
Classic Barrel
$10.00
This is an all plastic version of our Old West style wooden barrel. It is 3D printed.
Two lids are included, but we've found that once a lid is locked into position (they snap into place) they are extremely difficult to remove. For this reason we suggest that if you want to ever display the barrel with contents or be able to access inside the barrel, just secure one lid and don't use the other.
Two lids are included, but we've found that once a lid is locked into position (they snap into place) they are extremely difficult to remove. For this reason we suggest that if you want to ever display the barrel with contents or be able to access inside the barrel, just secure one lid and don't use the other.